Made from solid white oak the Round Table is our answer for coffee shops, eateries and commercial environments where space comes at a premium. With its neatly crossed legs and elegant lines, this sturdy piece will serve you and your customers for years to come.
22mm thick tops use 34x34mm beams for the base in order to retain a slender appearance, while the thicker 34mm thick top uses 50x50mm beams to create balance.
Our Standard Range features essentials for the home that are well designed, soundly built and accessible. Constructed from 22mm & 34mm solid white oak with a minimalist design aesthetic, these goods express a simple form follows function approach without excess. We offer multiple sizes of each item within this range, finished, sealed and ready to be enjoyed by you.
* Choose between two edge profiles: Chamfered 45 Degree or Bullnose.
Seating Guidelines:
Please note the measurement between the lowest underside point of a round table (i.e. below the table top) to the ground is 680mm, this means that any chairs with armrests must be measured to ensure those armrests are less than 680mm.
700(d) mm: +- 3 seats
900(d) mm: +- 4 seats
1250(d) mm: +- 4-5 seats
1500(d) mm:+- 5-6 seats
General Lead Time:
Our manufacture lead time ranges from 4-8 weeks depending on the particular item ordered. This period may change depending on unavoidable delays created by load-shedding, material availability or other circumstances; in this event you will be notified.
All our pieces are made by hand, with care and attention to detail and therefore production may take longer than originally estimated. Following from this, it should be understood that quality takes time, and delays are part of the process.
Payment Options:
We accept EFT (electronic funds transfer), Visa/Mastercard, or SnapScan payments only (no physical cash accepted).
Orders originating inside the Western Cape are confirmed and will only be processed upon having received a 50% deposit payment into our bank account as indicated on your invoice/quotation. A further 50% balance payment is due and payable upon delivery. No goods will be released for delivery until such time that payment has been made for all orders, in full.
Orders originating outside of the Western Cape are confirmed and will only be processed upon having received 100% full payment. The same terms apply for agencies/designers working on behalf of their clients.
Delivery (Large items):
We accept orders throughout South Africa, and offer a free professional delivery service for customers within 10km of our workshop in Paarden Eiland, Cape Town, outside of which we charge a standard scaling rate starting from R400.00.
For locations further than 60km we offer a free quoting service where we will obtain several quotations from external furniture moving companies on your behalf for the contents of your order, to be collected from us upon completion, and delivered to your doorstep. These quotations will be collated and presented to you for selection as we do not place any markup thereon.
For locations outside of the Cape Town (60km +), we will obtain quotations from trusted furniture moving companies on your behalf, to be collected from us upon completion, and delivered to your doorstep. These quotations will be reviewed by us, and the best one will be presented to for acceptance. We don’t place any mark-up on these, and as such, you would accept and pay for the delivery aspect yourself with the company.
Please note we strictly don’t offer hoisting services regarding our deliveries. If you are concerned that access for your ordered goods may be an issue, please communicate this with us prior to delivery.
Delivery (Small courier items):
Small items (eg chopping boards etc) can be couriered anywhere in SA using Prime Time Express. The base rate is R85.00 per order and may vary depending on your quantities.
Collection:
You are welcome to arrange for the collection of your order from our workshop in Paarden Eiland, after having received confirmation that your order is complete. Our operating hours are Monday – Friday from 10:00 – 16:00pm
We are situated on the ground floor within an industrial building which affords easy access for all vehicle types; please communicate any concerns before collection.
Manufacture & Joinery:
All our goods are constructed using a combination of mortis & tenon, dado, biscuit and dowel jointing with commercial grade wood adhesives to ensure a sound, solid build that will last.
Due to the nature of the natural material being worked with, we allow for a measurement deviation of up to 5mm for any length/width/height, and up to 2mm for any thickness.
Treatments & Finishes:
We use Rubio Monocoat which is a professional grade product to treat all our goods. This treatment preserves the oaks natural light tones while providing stain, wear and moisture protection and is ideal for hard-wearing surfaces.
Our tried and tested standard finish (see example here) is a natural looking, clear matt treatment with no shine/sheen that leaves surfaces with an enhanced contrast, bringing out the oaks unique characteristics and grain. Please note that this is not a varnish.
All our products come treated and ready to use upon delivery with no further action needed on your part.
Maintenance:
Avoid leaving any oil/liquid/moisture on your top surfaces. If this happens, clean them away immediately using a non-abrasive cloth. For stubborn marks, use cold water and a drop of dishwashing liquid if needed. Leaving oils/liquids overnight will cause stains, as these penetrate through the wood grain as gravity forces them down; the biggest culprits are pot plants and glasses left overnight.
For the regular maintenance and upkeep of your top surfaces, once every 6 months, apply our Care-Oil by using the soft side of a new kitchen sponge (the sponge wont absorb and waste oil and allows for easy application). Working from left to right in sections, pour enough Care-Oil on your top surface, then spread it thinly and evenly along the length of the grain, making sure to cover all areas equally. Leave the previous section to rest and move on until the entire surface is complete. Now using a lint-free cloth, perform a final gentle wipe along the entire length of the surface to ensure there are no streaks while removing any excess (there should be no pooling or visible oils marks). Once complete, leave the surface to dry for 6 hours. The entire process should take no longer than 5-10 minutes.
Do not use any aerosol or chemical based applicants (like Mr Min) as this damages the surface treatment.
Environment & Usage:
Always keep your goods inside, and out of direct sunlight/rain/wind to avoid weathering and possible damage. If your goods are exposed to regular sunlight for long hours, be extra diligent about following the maintenance procedure above to ensure adequate moisture.
Unless otherwise stated, all our goods are manufactured and treated for indoor/interior use only (balconies/patios are exterior environments as they are open air spaces). If you are considering purchasing an item for an exterior space like a covered patio, balcony or a similar area, please check with us first so we can advise accordingly.
Our Oak:
Our oak is locally sourced from sustainable importers and consists of the American White variety (referred to as white oak). We select a grade of oak which features minimal knots and a homogenous tone, all of which lend to producing furniture pieces which are pleasing to the eye and structurally sound.
We manufacture all our goods from two standard finished thicknesses, namely 22mm or 34mm solid oak. You will note the thickness used this when browsing our goods.
We do not guarantee any specific widths of oak planks used, rather we select the best oak planks available to us in order to create a homogenous, attractive and uniform surface with no striping. The general width of any one oak plank will not be less than 100mm.
Contacting Us:
View our full terms and conditions here. We are located at 11 Calcutta Street, 19 Tamric Park, Paarden Eiland, Cape Town, 7405. Viewings by appointment only. Get in contact with us by sending us an email to hello@good-oak.co.za or call +27 83 321 7804
